| Most viewed |
Original setup5054 viewsThis is the original setup with brushed motors and GWS 3 in 1
|
|
Left side of final equipment placement.4851 viewsThe motor controls, gyro and receiver positions were changed in an effort to move weight forward.
|
|
Low Flying Blade (indoors)4671 viewsThis is my blade in slow forward flight around the living room
|
|
Introducing the TigerBlade4584 views
|
|
4453 viewsNoyice this small antenna works great
|
|
amsterdam's BLADE4380 views
|
|
High Flyer4344 viewsThe blade almost hit the cieking (OOPS)
Mywife got a little upset LOL
|
|
Completed DYI tail group.3983 viewsMotor is a 20mm single stator (5mm), 12 magnet polls, 17 turn, wye terminated outrunner. The shaft is a 3mm GWS prop shaft, cut to fit.
|
|
3849 viewsFinal paint job
Noyice the carbon tail blade
|
|
DYI brushless tail group.3774 views
|
|
Lowered Gear3680 views
|
|
Hughes MD5003479 views
|
|
|
|
